Concrete Mixer Truck

  • 6 Cubic Meter SHACMAN MIXER TRUCK F3000

    6 Cubic Meter SHACMAN MIXER TRUCK F3000

    Our production line can manufacture different capacity concrete mixer tank with different Chinese brand chassis according to clients’ demand . For Shacman Chassis F3000 is one of the most popular export model for the mixer truck . Its characteristic as follow :

    ■ Cummins core power upgrade, FAST twin center shaft structure gearbox, HanDe high ratio single stage axle, vehicle power increased by 20%, Cummins ISM engine
    ■ High performance: Improved muffler, improved ground clearance, new exhaust system layout, lowest center of gravity, new stabilizing technology
    ■ Military grade chassis, reinforced driver cab, upgraded oil bath type air filter, strengthened transmission shaft, improved cab front suspension, new front axle stabilizer bar and muffler, imported cab turning shaft, off road racing quality cab damping spring
    ■ Mature power delivery system, increased overall efficiency, higher uptime, lower maintenance cost

     

  • 9 m³~12 m³ Shacman Mixer Truck-H3000

    9 m³~12 m³ Shacman Mixer Truck-H3000

    ■ Lightweight European design, precision power matching

    ■ Optimized intake module decreasing intake resistance by 6%

    ■ Efficient real axles that increase transmission efficiency by 13%

    ■ Intercooler resistance reduced by 29%

    ■ engine power loss reduced by 8%

    ■ Efficient tires which reduces rolling resistance by 10%

    ■ Cooling module developed from adopting German Behr BISS simulation software increasing cooling capacity by 10%

  • 10 m³ Bowl , High class concrete transportation ,Shacman Mixer Truck-X3000

    10 m³ Bowl , High class concrete transportation ,Shacman Mixer Truck-X3000

    ■  Special engine MAP, double cylinder load dump air compressor, throttle off technology, optimized fan control logic
    ■  New European style cabin design, full CFD optimization, drag coefficient decreased to 0.53
    ■  Intelligent electrical network architecture: Volvo electric design system
    ■  Engine inlet and cooling module, large air inlet cross section, higher air intake, patented cooling system, low air inlet resistance
    ■  MAN new single layer lightweight structure frame, formed from 6000T high strength hydraulic press

  • 6 m³ 6X4 MIXER TRUCK

    6 m³ 6X4 MIXER TRUCK

    Specs Sheet : 6 m³ 6X4 MIXER TRUCK ZZ1257M3247W Dimension CHASSIS OVERSIZE (mm) Length 8400 Mixer Tank Geometric Volume : 9.68 m³ Width 2500 Agitating Capacity : 6 m³ High 3650 Drum Rotating Speed :0~18 r/min WHEELTREAD (mm) Front Wheel 2401 Rear Wheel 1830 Thickness : 6 mm WHEELBASE (mm) 3625+1350 Front Suspension 1500 Drum Slope : 15 ° Rear Suspension 1747 Min. Ground Clearance 319 mm Water Tank:400 L Approach Angle (°) 16 Depar...
  • 8 m³ 6X4 MIXER TRUCK

    8 m³ 6X4 MIXER TRUCK

    Specs Sheet : 8 m³ 6X4 MIXER TRUCK ZZ1257M3247W Dimension CHASSIS OVERSIZE (mm) Length 8400 Mixer Tank Geometric Volume : 13.5 m³ Width 2500 Agitating Capacity : 8 m³ High 3850 Drum Rotating Speed :0~18 r/min WHEELTREAD (mm) Front Wheel 2401 Rear Wheel 1830 Thickness : 6 mm WHEELBASE (mm) 3225+1350 Front Suspension 1500 Drum Slope : 14 ° Rear Suspension 1747 Min. Ground Clearance 319 mm Water Tank:400 L Approach Angle (°) 16 Depa...
  • 10 m³ 8X4 MIXER TRUCK

    10 m³ 8X4 MIXER TRUCK

    Specs Sheet : 10 m³ 8X4 MIXER TRUCK  ZZ1317N3261W Dimension CHASSIS OVERSIZE (mm) Length 10605 Mixer Tank Geometric Volume : 16.85 m³ Width 2500 Agitating Capacity : 10 m³ High 3950 Drum Rotating Speed :0~18 r/min WHEELTREAD (mm) Front Wheel 2022 Rear Wheel 1830 Thickness : 6 mm WHEELBASE (mm) 1800+3200+ 1350 Front Suspension 1500 Drum Slope : 10 ° Rear Suspension 2357 Min. Ground Clearance 319 mm Water Tank:1200 L Approach Angle (°) ...

Send your message to us:

Write your message here and send it to us